What Tools Do I Need To Change My Brakes

This article contains a listing of tools that you typically demand to replace brake pads and rotors.

Replacing the brake pads and rotors is a do-it-yourself project that you tin can complete yourself in a couple of hours, as long as you have the right tools.

Here are tools that you will find handy when doing a brake job. You don't need to purchase all these tools because you most likely already have some of them. If you don't, we have provided links to where you can find whatever of them.

one. Ratchet and Socket Kit

To fix your vehicle, you must have a socket set.

Even though you only need a metric ready in nearly cases, it is all-time to choose a kit with both SAE and metric socket as you never know what you may need.

Domestic cars typically utilize SAE sockets, and import vehicles utilise metrics.

two. Torque Wrench

A torque wrench is a must. It will help you put the right torque on the caliper bolts. That mode, you will not break the commodities, and yous won't leave them also loose either.

As a beginner, you will need a torque wrench to ensure that the task is done right. If you don't know the torque specifications for a certain bolt, call your dealer parts or service department, and they will assist you.

3. Brake Pad Spreader or C-Clench

A restriction pad spreader or even a large c-clamp is handy when pressing the piston into the caliper. With this tool, yous tin easily retract the piston.

This will allow you to reset the piston, and therefore, you will be able to fit the new brake pads. While there are unlike ways to button the piston, but using a C-clench is much easier.

If yous are doing the restriction pad replacement job for the first time, this will be a bang-up tool to consider.

You will need to remove the caliper. Place the inner brake pad on the piston. Place the C-Clamp on the caliper and twist the bolt until the piston is pushed all the mode in.

The rear restriction piston may need to be rotated to be pushed, which tin can be done with a rear brake piston cube adaptor.

4. Torx / Allen Set

Often the restriction caliper bolts are held in place with Torx or Allen bolts.  This depends on what your car has installed; therefore, it is better to verify that you need to change your brake pads. You can chop-chop identify what your car uses by looking at the two bolts on the caliper's dorsum.

Suppose yous demand any of these bits or need to see how they wait like yous tin get a set up at your auto parts stores or online. If your manufacturer uses standard bolts, you lot won't need these $.25 to replace the restriction pads or rotor.

Editor'southward Choice: Tekton Hex Key Wrench Set

v. Restriction Bleeder Wrench

Yous will non need this unless you disconnect the restriction hose, which is unnecessary unless you change the brake caliper.

Bleeding the brakes ensures that there is no air trapped inside the hydraulic lines and caliper.

You tin can also use a regular wrench to loosen the brake bleed bolt/valve, only the brake bleeder tool is easier to use. It fits the bolt entirely, and therefore, it is less likely that you will damage the air drain valve.

Editor's Selection:  Brake Bleeder Wrench  by OEM Tools

6. Jack and Jack stands

While a heavy-duty jack is highly recommended, you can still utilize the jack that comes with the machine to jack up your motorcar.

If you program on doing any auto repair underneath your vehicle, including replacing the brakes, you should ever secure the vehicle with jack stands. They are inexpensive can save your life.

7. Lug Nut Wrench

Y'all already have a lug wrench in your car, simply the wrench that comes in well-nigh cars is a pain to apply and can fifty-fifty strip your lug basics.

I of our favorite tools is an aftermarket lug wrench. Not only does it take all the sizes, but information technology tin can be extended, which makes it very easy to remove those bolts that are hard to come out of.

8. Gloves

Always effort to utilize gloves when yous work on your car. They will protect your hands from chemicals and dirt. Plus, yous volition spend less time washing your easily after.

9. Dust Mask and Condom Glasses

Final but non least is the dust mask and condom glasses. Use a dust mask to avert breathing the dust on your wheel or brake pads and rotors.

While the glasses can save your eyes in case metals or screwdrivers, flying around.

The cost for brake service can range from a couple of hundred upwardly to eight hundred dollars. The brake pad and rotor parts are inexpensive, but the labor makes this repair very expensive. So why not supervene upon your brake pads and rotors yourself and relieve a lot of money?

Desire to know what almost automobile guys use to change their brakes? Watch this video by ChrisFix.

Source: https://www.youcanic.com/article/tools-do-need-change-brake-pads-rotors

Posted by: angcounts.blogspot.com

Share this post